Standard engine tuning

Information on tuning, carburetors, and mufflers

Standard engine tuning

Postby cbergen » Mon Jan 15, 2007 11:34 pm

With a G26 or G231 engine, start with both needles at 1 3/8 turns out. Check them before starting out, because there are NO FACTORY SETTINGS!
Chris Bergen
Bergen R/C Helicopters
Posts: 126
Joined: Thu Jan 11, 2007 8:15 pm
Location: Cassopolis, MI

Return to Engine setups

Who is online

Users browsing this forum: No registered users and 0 guests