Spanner Wrench for Fan Hub

Special tools available from us or recommended for assy of your heli

Spanner Wrench for Fan Hub

Postby cbergen » Thu Dec 13, 2007 1:03 pm

This tool makes installing and removing the fan and hub from your Gasser/90 engine much easier.


#1003T 10.95, including 2 4X16 SHCS

The entire toolkit is available, #TOOLKIT, $24.95. Includes all 3 tools.

Use it to hold the fan hub while tightening the bolt in the gas engine, or the collet nut on the Nitro engines.


Especially useful for the 90's where you REALLY need to torque that nut to prevent it coming loose, and on the gas engine to prevent "twisting" the crank while using a piston lock or some other method holding the flywheel, neither of which are recommended procedures.
Chris Bergen
Bergen R/C Helicopters
Posts: 126
Joined: Thu Jan 11, 2007 8:15 pm
Location: Cassopolis, MI

Return to Tools

Who is online

Users browsing this forum: No registered users and 1 guest