servo setup PICS Included

Servo setting up, including servo wheel installation

servo setup PICS Included

Postby miami6 » Sat Sep 29, 2007 6:54 pm

Well This project has been on the shelf for 7 months and now that I am focusing on it the must be something wrong with me


or there must be something missing


after I installed the Servos and build the linkages when i put them all together the rocket city lin hit the large wheel of the futaba servos


i had to add washers to the bottle of the ball to raise it of the the servo wheel to get the clearance needed


same with my recently purchased push pull tail servo kit




Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
miami6
 
Posts: 9
Joined: Fri Apr 06, 2007 10:51 pm
Location: Miami , Florida

Postby cbergen » Sat Sep 29, 2007 9:16 pm

What you're missing is the correct hardware!!

With the hardware included in the kit, you are supposed to install a nut under the ball as well as on the back side of the wheel. This spaces the ball out from the wheel.

Also, on the triple bellcrank for the collective you should have long balls instead of medium ones. This puts a better angle to the system to clear the wheel.

Also, and this is a change you may not have, on the "X" arm, we put long balls on the legs that have links to the servo.
Chris Bergen
Bergen R/C Helicopters
cbergen
 
Posts: 126
Joined: Thu Jan 11, 2007 8:15 pm
Location: Cassopolis, MI

Postby miami6 » Sun Sep 30, 2007 1:08 pm

Thanks

for the reply cbergen


will look for those extra parts in the parts bin and put them where they go , LOL
miami6
 
Posts: 9
Joined: Fri Apr 06, 2007 10:51 pm
Location: Miami , Florida


Return to Servo setups

Who is online

Users browsing this forum: No registered users and 1 guest

cron